Toshiba Satellite A500D Series Maintenance Manual page 12

Figure 4.30 Align the DP CONN, S/PDIF CONN, Audio CONN and RJ45 CONN...............4-38
Figure 4.31 Installing the DC-in jack .......................................................................................4-39
Figure 4.32 Removing the VGA Board....................................................................................4-40
Figure 4.33 Reapply the Shinetsu 7726 grease on the thermal module
and remove any release papers..............................................................................4-41
Figure 4.34 Removing the Thermal Module spring screws .....................................................4-42
Figure 4.35 Removing the CPU................................................................................................4-43
Figure 4.36 Reapply the Shinetsu 7726 grease on the thermal module
and remove any release papers..............................................................................4-44
Figure 4.37 Removing the display assembly............................................................................4-45
Figure 4.38 Removing the LCD Bezel Assembly from the low-end model ............................4-46
Figure 4.39 Peel off the bezel ...................................................................................................4-47
Figure 4.40 Pull out the hinge wall...........................................................................................4-47
Figure 4.41 Remove the bezel ..................................................................................................4-48
Figure 4.42 Removing the LCD Bezel Assembly from the high-end model ...........................4-48
Figure 4.43 Wrap the flat blade screwdriver with tape ............................................................4-49
Figure 4.44 Press the hinge wall...............................................................................................4-49
Figure 4.45 Pry up the bezel hinge wall ...................................................................................4-50
Figure 4.46 Release the rest of the hooks.................................................................................4-50
Figure 4.47 Push the right side of the bezel upward ................................................................4-51
Figure 4.48 Push the left side of the bezel upward...................................................................4-52
Figure 4.49 Release hooks from the bottom of the bezel .........................................................4-53
Figure 4.50 Release hooks from the right and left side of the bezel ........................................4-53
Figure 4.51 Release the hooks from the upper side of the bezel ..............................................4-54
Figure 4.52 Press the bezel hinge wall .....................................................................................4-55
Figure 4.53 Press the bottom hooks on the display assembly ..................................................4-55
Figure 4.54 Press the left and right side of the bezel for the low-end model/Press the
hooks on the left and right side of the bezel for the high-end model....................4-56
Figure 4.55 Press the bezel upside hooks .................................................................................4-56
Figure 4.56 Removing the Inverter Board................................................................................4-57
Figure 4.57 Removing the LCD Module from the LCD cover assembly
(high-end model) ...................................................................................................4-58
Figure 4.58 Removing the LCD Module from the LCD cover assembly
xii
[CONFIDENTIAL]
Satellite A500D/Pro A500D Series Maintenance Manual