Figure 4.24 Removing The Led Board; Led Board; Removing The Led Board; Installing The Led Board - Toshiba Satellite A500D Series Maintenance Manual

Error! Style not defined. Error! Style not defined.
4.14

LED board

Removing the LED Board

To remove the LED board from the logic lower assembly:
1. Remove one M2.5x4 screw and remove one cable from the motherboard as described in
Figure 4.24 below.

Installing the LED Board

Install the LED board according to the following procedure:
1. Seat the LED board on the logic lower assembly. Secure it with one M2.5x4 screw and
attach the cable to the motherboard.
Satellite A500D Maintenance Manual
M2.5x4*1

Figure 4.24 Removing the LED Board

4 Replacement Procedures
4-33