Installing A Remote Monitor Panel - Eaton Powerware 9315 Installation Manual

Chapter 9
As an option, you can install an RMP to monitor the operation of the UPS system from
virtually any location within your facility, up to 152.4m (500 ft) from the UPS. You can
flush-mount or surface-mount an RMP on a desktop or on a wall, wherever you have a
serial interface line. A maximum of two monitoring accessories (RMPs, Relay Interface
Modules, or Supervisory Contact Modules) can be installed. See Table 9-1 for the number
of accessories permitted. Figure 9-1 shows an RMP. Drawing 164201118−10 on page A−37
shows the enclosure dimensions and knockout patterns.
Table 9-1. Optional Monitoring Accessories
9315 UPS (300–500 kVA) Installation Manual S 164201118 Rev H www.powerware.com
EATON Powerware
®

Installing a Remote Monitor Panel

Number and Type of Accessories Permitted
Remote Monitor Panel
2
1
1
Relay Interface Module
2
1
1
Supervisory Contact Module
2
1
1
9−1