Chapter 4 Replacement Procedures
4.6
Wireless LAN card and BT Module
Removing a Wireless LAN card
The following describes the procedure for removing a Wireless LAN card (See Figure 4-6-1
to 4-6-2).
1.
Remove the screw of wireless LAN card.
M2x 2.5
2.
Disconnect the wireless LAN antenna cable from the connectors on a wireless
LAN card.
3.
Remove a wireless LAN card from the connector on the system board.
Satellite T130, Satellite Pro T130 , and PORTEGE T130Maintenance Manual (960-Q08)
BIND screw
Figure 4-6-1 Wireless LAN card
x2