Chapter 3 Test Program for Field
Pass Count
Error Count
Write Data
Read Data
Test Address
Error Status
Error Name
3.21.4
Test Stop Display
If an error occurs during a Subtest and YES is selected for Error Stop, the following message
displays:
[HALT OPERATION]
1. Test end
2. Continue
3. Retry
* Select 1, 2, or 3
The three selections have the following functions:
1: Terminates the test program and exits to the subtest menu.
2: Continues the test from the error.
3: Restarts the test from the beginning.
Use the arrow keys to move the cursor to the desired option and press Enter.
3.21.5 How to enter data
Letters which must be entered are always shown in [ ]. Simultaneous entries are displayed
by a "+" mark. For example:
[a] [Enter]
Press the "a" key, then press the [Enter] key.
[Ctrl] + [c]
Press the [Ctrl] key and the "c" key simultaneously.
Satellite T130, Satellite Pro T130, and PORTEGE T130 Maintenance Manual (960-Q08)
Displays the number of times the test has been executed.
Displays the number of errors which have occurred during the test.
Displays only the test data that has failed to compare during the
test while being written during the test.
Displays test data that has failed to compare during the test while
being read during the test.
Displays the Test Address. (The format differs for each test.)
Displays the error status.
Displays the name of the error.