Setup Guide for the Polycom SoundStation IP 7000 Phone
Installation Configuration
Symptom
The display shows:
"General configuration error
Unsupported configuration
Undo last configuration change"
The display shows:
"Daisy-Chaining Error:
Multiple Ethernet cables
Connect only one Ethernet
cable"
2 - 2
Problem
The phone installation
configuration is not supported.
More than one 3.6m (12ft)
Network Cable (10-pin) has been
connected to a phone
installation.
Corrective Action
Verify that you have installed the phone(s)
and any components correctly:
Check that no more than two phones
•
are connected together.
Check that no more than two
•
expansion microphones are installed.
If your conference room setup has two
connected phones, check that only
one expansion microphone is
installed.
Refer to
Installing Your Phone
•
page 1-3.
Contact your system administrator.
•
Connect only one 3.6m (12ft) Network
Cable (10-pin) to the multiple phone
installation. See
Installing Your Phone
page 1-3.
on
on