Installing Your Phone; Connecting Network And Power Sources - Polycom SoundStation IP 7000 Setup Manual

Installing Your Phone

Connecting Network and Power Sources

Note
Note
• Mobile Device Cables (2.5mm and 3.5mm)
• Computer Calling Cable
• Video Kit with:
— Polycom ® Microphone Array Cable
This section describes how to install your phone. It includes the following
topics:
• Connecting Network and Power Sources
• Connecting Optional External Microphones
• Connecting Optional Auxiliary Audio Components
• Connecting Optional Video Components
When you connect your phone to a Polycom
®
Polycom RealPresence
to a power source. To set up your phone with a Polycom HDX system or
Polycom RealPresence Group system, see
Components on page 1-13.
There are four ways to connect your phone to the network and a power source.
Your system administrator can tell you which of the following methods best
suits your teleconferencing needs:
• Power over Ethernet (PoE)
• AC Power (One Phone)
• AC Power (One Phone, with Multi-Interface Module)
• AC Power (Two Phones, with Multi-Interface Module)
Connecting Your Phone Using a Power over Ethernet Source
Power over Ethernet is the default connection for your phone.
AC power adapters are not included in the PoE package. If you require one, see
your system administrator.
on page
on page
®
HDX
®
Group system, you do not need to connect your phone
Connecting Optional Video
Setting Up Your Phone
1-3
on page 1-8
on page 1-11
1-13
®
system or
1 - 3