Jensen JTA-450 Instruction Manual page 12

PROGRAMMED PLAY
Programmed play can only be achieved in Stop mode.
1. In stop mode, briefly press the MODE button (14) on the unit. Program Channel
No. 'P1' will briefly appear. 'P' will then disappear leaving the Program
Indicator,'PROG' and '1' flash in the Display to prompt for input.
2. Press the
the program. For example the first selection is track no.5.
3. Press the MODE button (14) to confirmed when track No.5 flashed in the
Display.
The first program selection is now stored in the program memory.
The Program Channel No. 'P 2' will appear briefly. 'P' will disappear and 2 will
revert to 5, i.e. the first selected program and flash together with 'PROG' to
prompt for another input.
4. Repeat points 2 and 3 to enter the desired tracks up to max 32 selections.
5. Press the
6. To clear the program memory, while playing press the Stop button 2 times or
select TUNER, PHONO function or turn the Syatem off.
The files stored on your USB flash drive or on the SD/MMC card can be copied to each
other. Please follow the instructions below to copy the files between the USB port and
the Card slot.
1. Insert your USB flash drive into the USB PORT (22) and the SD/MMC Memory Card
into the SD/MMC Slot (20).
2. Select the USB / CARD function mode by setting the Function selector (12) to
"USB/CARD".
playback will automatically start from the first track.
3. Press the STOP/USB/SD Button once to stop the playback. Copy of the USB files to
the Card is now ready to proceed any time. If you want to copy the files from the
Card to the USB, you need to enter the Card playback Stop mode first then proceed
to Step 4 below for copying.
USB Playback Stop Mode
or Buttons (4, 5) to select your desired track to be stored in
button once to start playback in your programmed sequence.
COPYING FILES BETWEEN USB AND CARD
.
The total number of tracks on the USB will be displayed and
Card Playback Stop Mode
11