Clock Setting; Basic Disc(S) Play; Programming Cd Tracks - Jensen JMC-670 Instruction Manual

CLOCK SETTING

Note: The clock has to be set the first time you use the unit.
TO SET THE CURRENT TIME
For example to set the clock at 7:30 AM
1. In STANDBY Mode, press MEMORY Button (7/H6) once. Hour digit flashes to prompt for input.
2. Press the / Button (11/H7) to adjust the hour.
Note: Make sure the hour is set so that AM or PM is
correctly displayed.
3.Press MEMORY Button (7/H6) to confirm the selection
and minute position flashes to prompt for input.
4.Press the / Button (11/H7) to adjust the minute.
5.Press MEMORY Button (7/H6) again to complete setting.
COMPACT DISC OPERATIONS
NOTE: This player plays not only commercial CDs but also self-complied CD-R/RW/MP3-CD discs.

BASIC DISC(s) PLAY

1.Press the Button (10/H1) to turn on the unit.
2.Press the OPEN/CLOSE Button (2/H10) to open both the CD door.
3.Place the CD(s), with label side facing outward, inside the CD compart
ment. Press OPEN/CLOSE Button (2/H10) again to close the CD doors.
IMPORTANT: The CD doors are motorized doors. DO NOT PUSH WITH
HAND OR USE ANY OT HER MEANS TO OPEN OR CLOSE IT. THIS
COULD DAMAGE THE DOOR MECHANISM.
4.Press the Function Button (3/H3) to operate the unit in CD mode.
5. Press CD1/CD2 (4/H4) button to select the CD location.
6.The unit will scan the CD in selected CD compartments, the total number
of tracks and total play time of the CD in the chosen CD location appear
in the display (18). (Only Folder number and track number will shown
for MP3-CD)
HX-1056M3 IB JENS 001 REV0.P65 6
JMC-670 INSTRUCTION MANUAL
H1
H5
H4
E-9
Note: If no CD is inserted in the chosen CD location, "NO DISC" appears.
7.The CD indicator (#D9) appears with either " " or " ", indicating the current CD location.
8.Press Button (9/H5) to start playing.
T O :
Stop play
Pause play
R e s u m e p a l y a t f r e p a u s e
Scan forward and backward
S k p i t a r c s k
Control the volume
Stop output from speakers
Resume speaker output
Other CD/MP3-CD function
1) Repeat (12/H15) - Use this key can select different Play Mode between repeat one, repeat folder (MP3-
CD only), repeat current CD and random play.
a) Repeat current track - Press Repeat button once, the REPEAT indicator appears and current track
repeated continuously.
b) Repeat Folder (MP3-CD only) - Press Repeat button until REPEAT FOLDER indicator shown on display, the
selected folder will repeated continuously.
c) Repeat current disc - Press Repeat button unitil REPEATALL indicator shown on display, the current CD
will repeat continuously.
d) Random play - Press Repeat button until RANDOM indicator appears on display and the current disc will
play randomly.
DISC ERROR
Note: If the disc is dirty, damaged or unreadable, the 'NO DISC' will appear in the display. If this occurs, clean
the disc, insert the disc correctly, or try another disc.
H3

PROGRAMMING CD TRACKS

With this function you can program up to 20 titles of selected disc in the order you desire.This function can
only be done in stop mode.
H10
1. Press the MEMORY Button to start programming tracks, "MEMORY" indicator, '
and blinks.
7/20/2005, 2:53 PM
JMC-670 INSTRUCTION MANUAL
P R E S : S M ulti-Function Display:
8 ( H / 1 ) 1 T t o l a n u m b r e o
time are shown
9 ( H / ) 5 o n c e P a l y b a k c n I d c i t a
9 ( H / ) 5 a g a n i C r u e r t n p a l y n i g
elapsed play time are shown
And hold / (11/H7) Play time changed rapidly
/ ( 1 1 H / ) 7 P a l y n i g t a r k c n
± Volume Control (15/H9) Volume Level is shown
MUTE Button (H16) once "MUTE" (#D4) lights
MUTE Button (H16) again "MUTE" (#D4) off
:
:
:
:
E-10
t f a r c s k a n d t t o l a p a l y
r o (D8) blinks
t a r k c n u m b r e a n d
u m b r e c h a n g e d
' appear in the display