Olivetti ECR 5000 Instructions Manual page 50

Discounting (-%) Individual Items using the
Programmed Discount Rate
Up to four digits can be used for the discount percentage (0-99.99). You
MUST enter two digits after the decimal position.
Example: Register a programmed 10% discount on a £3.00 item to
Department 5, and a £2.50 item to Department 4. Compute the change
tender.
Proceed as follows:
1. Type [300] and press the [Department 5] key.
2. Press the [-%] key to apply the programmed discount. The amount
discounted is displayed.
3. Type [250] and press the [Department 4] key.
4. Press the [ST/#/NS] key to print and display the current balance due.
5. Type the amount tendered [600] and press the [Amt Tend/TOTAL]
key. The change due to the customer is displayed and the transaction
ends successfully.
Programmed discount rate
Discount
43