B. Transfer Charging Roller
1) Open the front door, and release the
feeding assembly.
2) Remove the screw, and detach the transfer
charging roller unit.
3) Open the claw [1] of the bushing at the
front, and slide the transfer charging roller
[2] to the front to detach.
[1]
Figure 6-402
Caution:
Do not touch the surface [1] of the
transfer roller; otherwise, image faults
can occur.
[1]
Figure 6-403
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 400/330 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 IMAGE FORMATION SYSTEM
C. Drum Sensor Unit
1) Remove the drum unit.
2) While pulling the two claws [1], detach
the drum unit [2].
[2]
[1]
[2]
Figure 6-404
6-25