Table of Contents
Advertisement
INSTALLATION
This appliance does not require a 120V A.C. supply for operation.
NOTE: 4 AA batteries must be installed in the battery pack to operate the burner switch. Do not use a 9 volt battery.
Standard Main On/Off Switch
or Optional Wall Switch
The appliance, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes with the National Electrical
Code, ANSI/NFPA 70, if applicable.
16
PTO30 WIRING DIAGRAM
0.886.001
Proflame Valve
PTO60 WIRING DIAGRAM
ON/OFF Switch
Regency Plateau™ PTO30 Outdoor Gas Fireplace
Advertisement
Table of Contents
