Adding A Voice Dialing Command - Kenwood KIV-700 Instruction Manual

Bluetooth Setup (Optional)

Adding a Voice Dialing Command

Add a voice tag to the phone book for voice dialing.
You can register up to 35 voice tags.
1
Enter Bluetooth mode
Press the [TI] button for at least 1 second.
2
Enter Phone book name edit mode
Turn the [Volume] knob and press it when the
desired item is displayed.
>
Select "BT Settings"
"Phonebook Name Edit".
3
Search for the name to register
Select the name to register with reference to 4 in
<Calling a Number in the Phone Book> (page
If a voice tag has already been registered for a
name, "*" is displayed before the name.
4
Select a mode
Turn the [Volume] knob.
Display
"Phonebook Name Registration" Register a voice tag.
"Phonebook Name Check"*
"Phonebook Name Delete"*
* Displayed only when a name for which a voice tag has
been registered is selected.
Select "Phonebook Name Registration"
(Registration)
5
Register a voice tag (first)
"Enter Voice 1" is displayed.
When a beep is heard, say a voice tag within 2
seconds.
6
Confirm the voice tag (second)
"Enter Voice 2" is displayed.
When a beep is heard, say the same voice tag as
that you said in step 6 within 2 seconds.
"Completed" is displayed.
7
End registration
Press the [Volume] knob.
Return to step 3. You can register another voice tag
continuously.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the [Volume] knob allows you to retry
voice input. Refer to <Troubleshooting Guide> (page
54
|
KIV-700
>
"Voice Tag"
30).
Operation
Play a voice tag.
Delete a voice tag.
72).
Autogood products Internet store "130"
Select "Phonebook Name Check" (Play)
5
Press the [Volume] knob.
Play the registered voice and return to step 3.
Select "Phonebook Name Delete" (Delete)
5
Delete a voice tag
Press the [Volume] knob.
6
Turn the [Volume] knob to select "YES", and
then press the [Volume] knob.
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
⁄
• Audio sound is not output during voice tag registration.