Kenwood KIV-BT901 Instruction Manual

Digital media receiver
Hide thumbs Also See for KIV-BT901:
Table of Contents

Advertisement

Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new Digital
Media-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided
below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model KIV-BT901/ KIV-701 Serial number
US Residents Only
Register your Kenwood product at www.Kenwoodusa.com
© 2011 Kenwood Corporation All Rights Reserved.
KIV-BT901
KIV-701
DIGITAL MEDIA RECEIVER

INSTRUCTION MANUAL

Before reading this manual, click the button below to check
the latest edition and the modified pages.
Register Online
11ORD_IM337_Ref_K_en_00

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood KIV-BT901

  • Page 1: Instruction Manual

    Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
  • Page 2: Table Of Contents

    About PANDORA® internet radio Disc Changer Control About USB device DSP Setup (Optional) About USB hub Car Type Selection About “KENWOOD Music Editor” Basic Operation Speaker Setting About the Cell-Phone Play Mode Car Type Fine Adjustments About Satellite Radio tuner (Optional) Direct Music Search X’Over Setting...
  • Page 3: Before Use

    • When you purchase optional accessories, check with • Do not watch or fix your eyes on the unit’s display your Kenwood dealer to make sure that they work when you are driving for any extended period. with your model and in your area.
  • Page 4: Component Names And Functions

    To start or interrupt playback for audio file and details. iPod. (press the button). KIV-BT901 : To display Play mode in the Menu List To select the remove mode, and remove the USB (press the knob at least 1 second).
  • Page 5: General Operation

    General Operation Exit of the Demonstration Mode Menu List Operation Turn off the demonstration mode when you use it The basic operating procedure for using this for the first time after installation. function is described below. The individual function items are covered in the operating procedures. Press the [Volume] knob to quit the demonstration mode when the message “To Select the source...
  • Page 6: Ipod/Iphone Operation

    4 Album art When set to “ON”, allows you to operate iPod with 5 Play mode indicator (see <Display Indicator the control on the iPod. items> (page 76)) KIV-BT901 The setting of “iPod By Hand Mode” in <Play Mode> (page KIV-BT901/ KIV-701...
  • Page 7: Selecting A Song By Browsing Ipod

    Selecting a Song by Browsing iPod Cancelling the Menu List mode Press the [MENU] button for at least 1 second, Display Items and then press it again briefly. “Music” ⁄ “Playlists” Playlists • The unit memorizes the position where you have found a “Artists”...
  • Page 8: Play Mode

    Enter Play Mode in the Menu List <Basic Operation>. KIV-BT901: Press the [Volume] knob for at least • This mode is not compatible with music information 1 second. display. The display will show “iPod By Hand Mode”.
  • Page 9: Ipod Setting

    Make a setting Enter Search mode Turn the [Volume] knob to select a setting Press the [SEARCH MODE] button. value, and then press the [Volume] knob. ✍ The search mode you can select changes depending on normal playback or browsing. For Exit Menu List mode browsing operation, see <Selecting a Song by...
  • Page 10: Direct Search

    After this step, you need to browse. See step 4 of <Selecting a Song by Browsing iPod> (page 7) select a song. Cancelling the Direct Search Press the [SEARCH MODE] button. KIV-BT901/ KIV-701...
  • Page 11: Alphabet Search

    Alphabet Search Skip Search You can select a song by alphabet. This function You can scroll up or down according to the number searches songs whose name contain the specified of the selected Search items so that you can quickly character(s) in the list of the selected Search item switch the display position.
  • Page 12: My Playlist

    Playlist mode. • The ending of a song may be cut unless the song has a silence of 1 second or longer at the end. • Random play cannot be performed during playback of a song in the Playlist. KIV-BT901/ KIV-701...
  • Page 13 English...
  • Page 14: Pandora® Internet Radio Operation

    “No skips remaining” is displayed. Enter Menu List mode Remove iPhone Press the [MENU] button. Press the [38] button for at least 2 seconds. The unit enters the USB REMOVE mode (“USB REMOVE” is displayed), and the iPhone can be removed safely. KIV-BT901/ KIV-701...
  • Page 15: Bookmark Registration

    Turn the [Volume] knob and press it when the Select the character to be searched for desired item is displayed. Operation type Operation > Select “Stations” “A-Z” (Stations are displayed Move between items Turn the [Volume] knob. in alphabetical order) or “By Date” (Stations are Select an item Press the [Volume] knob.
  • Page 16: Usb Device/ Zune/ Internal Memory Operation

    • Built-in flash memory: 512 MB 1. Enter Menu List mode Press the [MENU] button. 2. Turn the [Volume] knob and press it when the desired item is displayed. Select “Port Up”. Repeat these steps to switch to the device to be connected. KIV-BT901/ KIV-701...
  • Page 17: File Search

    File Search ✍ For example: Searching for ¡". Turn the [Volume] knob and press it when the Selecting the file you want to listen to from the desired item is displayed. device being played now. Select “USB List” > 1 > 2 > ¡" USB device/ Internal memory source Display Items...
  • Page 18: Skip Search

    Select USB/ Zune/ Internal memory source switch the display position. Enter Play Mode in the Menu List Select USB or Zune source KIV-BT901: Press the [Volume] knob for at least Enter File Search mode 1 second. Press the [MENU] button.
  • Page 19: Direct Music Search

    “Device F/W Updates the firmware. The update information Update” will be posted on the following URL as necessary. www.kenwood.com/cs/ce/ : Factory setting) Selectable when Music Editor media or Zune is used. Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly.
  • Page 20: Copying From Usb Device

    Select “OK”. Press the [Volume] knob. “Completed” is displayed when copying completes. Copying resumes. ✍ Cancelling copy 1. Press the [Volume] knob. 2. Turn the [Volume] knob and press it when the desired item is displayed. Select “YES”. KIV-BT901/ KIV-701...
  • Page 21: Deleting Files In Memory

    Function of Internal memory source Deleting file or folder Deleting Files in Memory Select Internal memory source Deleting Files in Memory. Enter Menu List mode Press the [MENU] button. Display Items Enter Delete mode “Settings” Turn the [Volume] knob and press it when the “Internal Memory Delete a folder or file.
  • Page 22: Picture File Viewing

    • A wallpaper (picture file) cannot be downloaded during the slide show. Cancel the slide show, and then download a wallpaper. • When a new wallpaper is downloaded, it will overwrite the currently downloaded wallpaper. There is no way to delete the downloaded pictures. KIV-BT901/ KIV-701...
  • Page 23 English...
  • Page 24: Disc Changer Control (Optional)

    DISP You can select a Play Mode, such as Random play and Repeat play. Select CD changer source Enter Play Mode in the Menu List KIV-BT901: Press the [Volume] knob for at least ¢ SCRL 1 second. KIV-701: Basic Operation 1.
  • Page 25: Direct Music Search

    Function of remote control Direct Music Search Searching the music by entering the track number. Enter Direct Music Search mode Press the [DIRECT] button on the remote control. Enter the music number Press the number buttons on the remote control. Search the music Press the [4] or [¢] button.
  • Page 26: Tuner Operation

    (page 76)) a situation, turn it OFF. • “TI” (Traffic information) Turns ON or OFF the Traffic Information function. When the function is set to ON, “TI” indicator is ON. If traffic bulletin starts when the function is ON, KIV-BT901/ KIV-701...
  • Page 27: Station Preset Memory

    Auto Memory Entry “Traffic INFO” is displayed and traffic information is received. Putting stations with good reception in the memory If the volume is adjusted during reception of traffic automatically. information, the adjusted volume is memorized automatically. The memorized volume will be applied next Select the radio band you wish to store in the time the Traffic Information function is turned ON.
  • Page 28: Tuner Setting

    Cancelling Direct Access Tuning registered to this unit is transferred to the connected Press the [DIRECT] button on the remote iPod. control. • The memory usage can be checked by selecting “TAG Memory” of <Tuner Setting> (page 26). KIV-BT901/ KIV-701...
  • Page 29: Pty (Program Type)

    PTY (Program Type) Program Type Preset Selecting the Program Type below and searching Putting the Program Type in the Preset button for a station. memory and quick recall. Program Type Display Program Type Display Presetting the Program Type Speech “Speech” Soft “Soft”...
  • Page 30: Rear View Camera (Optional)

    Press the [MENU] button for at least 1 second, and then press it again briefly. ⁄ • To use the rear view camera feature, connection of a reverse sensor wire is required. Refer to <Connecting Wires to Terminals> (page 80). KIV-BT901/ KIV-701...
  • Page 31: Bluetooth Audio Operation

    Function of KIV-701 with KCA-BT300/BT200 (Optional Accessory) Bluetooth Audio Operation Basic Operation Volume DISP Selecting Bluetooth Audio source Press the [SRC] button repeatedly also switches source. Select the “ BT AUD EXT” display. ✍ SRC Select mode 2: Press the [SRC] button. Turn ¢...
  • Page 32: Operation Of Hands-Free Phoning

    Function of KIV-BT901 KIV-701 with KCA-BT300/BT200 (Optional Accessory) Operation of Hands-Free Phoning KIV-701 Volume MENU DISP The following 3 steps procedure is necessary. Step 1. Pairing (Registering from Bluetooth devices) To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing).
  • Page 33: Receiving A Call

    • The name of the calling party is displayed if it has already Answering another Incoming Call after been registered in the Phone Book. Terminating the Current Call KIV-BT901: Press the [SRC] or [ ] button. Rejecting an Incoming Call KIV-701: Press the [SRC] or [iPod] button.
  • Page 34: Making A Call

    Operation of Hands-Free Phoning Making a Call Calling a Number in the Phone Book Enter Bluetooth mode Enter Bluetooth mode KIV-BT901: Press the [ ] button. KIV-BT901: Press the [ ] button. KIV-701: Press the [iPod] button for at least 1...
  • Page 35: Dial A Number

    60). controller. • Audio sound is not output during voice recognition. Make a call • Press the [Volume] knob. • Press the [DIRECT] button on the remote controller. ⁄ • You can input max 25 (KIV-BT901)/ 32 (KIV-701) digits. English...
  • Page 36: Registering To The Preset Dial Number

    Function of KIV-BT901 KIV-701 with KCA-BT300/BT200 (Optional Accessory) Operation of Hands-Free Phoning Registering to the Preset Dial Number List Select the phone number you wish to register Select the phone number with reference to the following: - Calling a Number in the Phone Book (page 34)
  • Page 37 English...
  • Page 38: Display Settings

    Select the setting item to adjust Exit Menu List mode Turn the [Volume] knob and press it when the Press the [MENU] button for at least 1 second, desired item is displayed. and then press it again briefly. KIV-BT901/ KIV-701...
  • Page 39: Illumination Color Selection

    Illumination Color Selection Customization of Clock Display Selecting the Illumination Color of the panel. You can customize the display of the Clock Display mode. Enter Menu List mode Press the [MENU] button. Select the source Press the [SRC] button repeatedly also switches Enter Illumination color selection mode source.
  • Page 40: Customization Of Display

    Frequency (“Frequency”) Artist name* (“Artist Name”) and then press it again briefly. Station name (“Station Name”) Date (“Date”) Song title (“Song Title”/ “Title”) Spectrum analyzer (“Speana”) Album name* (“Album Name”) Blank (“Blank”) Only with KTC-HR300 (optional accessory) connected KIV-BT901/ KIV-701...
  • Page 41: Auxiliary Input Display Setting

    In SIRIUS source (Optional) Auxiliary Input Display Setting Channel Name (“Channel Name”) Band & Channel Number Selecting the display when changing to Auxiliary (“Channel Number”) Song Title (“Song Title”) input source. Date (“Date”) Artist name (“Artist Name”) Select the AUX source Spectrum analyzer (“Speana”) Composer name (“Composer Press the [SRC] button repeatedly also switches...
  • Page 42: Clock And Other Functions

    1. Turn the [Volume] knob and press it when the desired item is displayed. Select hours, minutes or time zone (home or sub). 2. Turn the [Volume] knob to select a setting value, and then press the [Volume] knob. 3. Press the [MENU] button. KIV-BT901/ KIV-701...
  • Page 43: Initial Settings

    URL as Select the setting item to adjust necessary. Turn the [Volume] knob and press it when the www.kenwood.com/cs/ce/ desired item is displayed. : Factory setting) Not selectable when KTC-HR200 (optional accessory) is Display Overview connected.
  • Page 44: Demonstration Mode Setting

    The “CALL” display disappears and the audio system comes back ON. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 80). KIV-BT901/ KIV-701...
  • Page 45 English...
  • Page 46: Audio Adjustments

    - Car Type Fine Adjustments (page 51). Main source and sub source output Front channel and - X’Over Setting (page 52). Rear channel separately. “Volume Offset” Sets each source’s volume as a difference from the basic volume. “–8” — “0” (AUX: “–8”— “+8”) KIV-BT901/ KIV-701...
  • Page 47: Preset Equalizer Curve Select

    Preset Equalizer Curve Select Manual Equalizer Control You can select following Equalizer curve. You can adjust following Equalizer Control items. Display Equalizer curve Band Item Range “Natural” Natural “BAND1” (62.5 Hz) “GAIN” Band level -9 –+9 dB “User” User* “EFCT” Bass Effect “OFF”/ “ON”...
  • Page 48: Listening Position Selection

    [Volume] knob. Adjust between 0 and 5.58 feet. Press the [Volume] knob for at least 1 second if you want to execute the “INITIAL”. Exit Audio Control mode Press the [MENU] button for at least 1 second. KIV-BT901/ KIV-701...
  • Page 49: Dual Zone System

    Dual Zone System • The Bluetooth audio source can be set exclusively to the front speaker. Set “2Zone Front/Rear” to “Rear”. The separate sources can be selected for Front • The source set as a sub source cannot be operated channel and Rear channel.
  • Page 50: Dsp Setup

    [Volume] knob. • You can compensate the distances in more details by Exit Audio Control mode using <Car Type Fine Adjustments> (page 51) function. Press the [MENU] button for at least 1 second. KIV-BT901/ KIV-701...
  • Page 51: Car Type Fine Adjustments

    Car Type Fine Adjustments Reference point Adjusting fine tuning of the speaker position compensation value specified at <Car Type Selection> (page 50). +3.2 feet Display Item Range FRONT FRONT 1.7 feet 0 – 14.44 feet “Front” Front speaker 0 – 14.44 feet “Rear”...
  • Page 52: X'over Setting

    Turn the [Volume] knob and press it when the desired item is displayed. Make a setting Turn the [Volume] knob to select a setting value, and then press the [Volume] knob. Repeat steps 3 to 5 to complete the X’Over settings KIV-BT901/ KIV-701...
  • Page 53: Audio Preset Recall

    Audio Preset Recall Recalling the sound setup registered by <Audio Preset Memory> (page 52). Select the source Press the [SRC] button repeatedly also switches source. Select a source other than “ STANDBY”. ✍ SRC Select mode 2: Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed.
  • Page 54: Bluetooth Setup

    Press the [Volume] knob for at least 1 second. You can select following Bluetooth Setting items. If “Pairing Success” is displayed, registration is Enter Bluetooth mode completed. KIV-BT901: Press the [ ] button. When “Confirm Phone” is displayed, confirm KIV-701: Press the [iPod] button for at least 1 connection with a cell-phone operation.
  • Page 55 (Pairing)> (page 56). Accessory) “Device Delete” Cancel registration of the Bluetooth device. Function of KIV-BT901 Refer to <Deleting a Registered Bluetooth Function of KIV-BT901/ KIV-701 with KCA-BT300 Device> (page 58). (Optional Accessory) “SMS Download” Download a short message. Refer to <Downloading the SMS>...
  • Page 56: Registering Bluetooth Device (Pairing)

    When “Confirm Phone” is displayed, confirm By operating the Bluetooth device, register the connection with a cell-phone operation. hands-free unit (pairing). Select “KENWOOD BT ✍ If the error message appears even though the USB/R-3P1”/ “KCA-BT300”/ “KCA-BT200” from the list PIN code is correct, try <Registering Special...
  • Page 57: Registering Pin Code

    When two or more Bluetooth devices have already been registered, you need to select the Bluetooth Enter Bluetooth mode device you wish to use. KIV-BT901: Press the [ ] button. KIV-701: Press the [iPod] button for at least 1 Enter Bluetooth mode second.
  • Page 58: Deleting A Registered Bluetooth

    ⁄ • Up to 1000 phone numbers can be registered for each registered cell-phone. • Up to 25 (KIV-BT901)/ 32 (KIV-701) digits can be registered for each phone number along with up to 50* characters representing a name. (* 50: Number of alphabetical characters. Fewer characters can be input depending on the type of characters.)
  • Page 59: Adding A Voice Dialing Command

    Play the registered voice and return to step 3. You can register up to 35 voice tags. Select “Phonebook Name Delete” (Delete) Enter Bluetooth mode KIV-BT901: Press the [ ] button. Delete a voice tag KIV-701: Press the [iPod] button for at least 1 Press the [Volume] knob.
  • Page 60: Setting A Voice Command For Category

    Setting a Voice Command for Category Add a voice tag to the phone number category (type) for voice calling. Enter Bluetooth mode KIV-BT901: Press the [ ] button. KIV-701: Press the [iPod] button for at least 1 second. Enter Phone Number type edit mode Turn the [Volume] knob and press it when the desired item is displayed.
  • Page 61: Sms (Short Message Service)

    Download the short message (SMS) arrived at the Displaying the SMS cell-phone so that it can be read on this unit. Enter Bluetooth mode Enter Bluetooth mode KIV-BT901: Press the [ ] button. KIV-BT901: Press the [ ] button. KIV-701:...
  • Page 62: Satellite Radio Tuner Control (Optional)

    Turn the [Volume] knob to select Category, and then press the [Volume] knob. Select the Channel 1 Station information (see <Customization of Turn the [Volume] knob to select Channel, and Display> (page 40)) then press the [Volume] knob. KIV-BT901/ KIV-701...
  • Page 63: Preset Memory

    Cancelling Category and Channel Search mode Channel Scan Press the [MENU] button for at least 1 second, Every receivable Channel is checked for 10 seconds. and then press it again briefly. Select Satellite Radio source ⁄ Enter Menu List mode •...
  • Page 64: Hd Radio™ Tuner Control (Optional)

    1 Station information (see <Customization of ⁄ Display> (page 40)) • This setting can be made when “Type Normal” is selected 2 Status indicator (see <Display Indicator items> for the “Tuner Preset Type” of <Initial Settings> (page 43). (page 76)) KIV-BT901/ KIV-701...
  • Page 65: Preset Tuning

    Preset Tuning HD Radio™ Setting Recalling the stations in the memory. You can select following HD Radio Setting items. Select the radio band Select the HD Radio source Enter Menu List mode Enter Menu List mode Press the [MENU] button. Press the [MENU] button.
  • Page 66: Direct Access Tuning

    Tune in to the entered frequency or channel Press the [4] or [¢] button. Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control. ⁄ • You can enter the FM band frequency in steps of a minimum of 0.1 MHz. KIV-BT901/ KIV-701...
  • Page 67 English...
  • Page 68: Basic Operations Of Remote Control

    • Preset band select: [FM] • Enter Audio Control mode: [AUD] • Channel select: [4]/[¢] • Recall preset channels: [1] — [6] In HD Radio source • Band select: [FM+]/[AM–] • Station select: [4]/[¢] • Recall preset stations: [1] — [6] KIV-BT901/ KIV-701...
  • Page 69: Hands-Free Phone Control

    Hands-free phone control Preparing the remote control unit Pull the battery sheet out from the remote control Making a call • Enter the dialing method selection mode: [ ] unit to the direction of the arrow. • Select a dialing method: [ENT] •...
  • Page 70: Appendix

    Changing the browse WMV 9 (.wmv) item will display a correct title, etc. • Picture size • You cannot operate iPod if “KENWOOD” or “✓” Recommended: 320 x 240 (QVGA) displayed on iPod. Minimum: 160 x 120 •...
  • Page 71: About Pandora® Internet Radio

    ⁄ About “KENWOOD Music Editor” • The Pandora service is available only in the U.S. • This unit supports the PC application “KENWOOD • Because PANDORA® internet radio is a third-party service, Music Editor Light ver1.1” or later. the specifications are subject to change without prior •...
  • Page 72: About The Cell-Phone

    With the HD Radio tuner, you can use “Initial Settings” – the similar functions of Tuner features. “Tuner Preset Type” “Source Select” “Beep” “Menu Language Select” “Pandora Source” “Built in AUX” “Built in AMP” “AV Out Set” “R-CAM Interruption” “R-CAM Mirror” “System F/W Update” KIV-BT901/ KIV-701...
  • Page 73 Function items appearing when the iPod source Function items appearing when the USB source is selected is selected Display Page Display Page “Music” “USB List” “Playlists” “Copy from USB” “Artists” “Play Mode” “Albums” “File Scan” “Songs” “Folder Random” “Podcasts” “All Random” “Genres”...
  • Page 74 “Settings” – is selected “Internal Memory Delete” Display Page “Internal Memory Format” “Settings” – “Clock & Date” – “Name Set” “Display & Illumination” – “Clock & Date” – “Tuner Settings” – “Display & Illumination” – “Tuner Settings” – KIV-BT901/ KIV-701...
  • Page 75 Function items appearing when the Hands-Free Function items appearing when the Satellite source is selected Radio tuner source is selected Display Page Display Page “Preset Call” “List & Memory” “Phonebook” “SR1”/ “XM1” “Outgoing Calls” “SR2”/ “XM2” “Incoming Calls” “SR3”/ “XM3” “Missed Calls”...
  • Page 76: Display Indicator Items

    “CALL WAIT” Indicates call-waiting. Denver –7:00 “PRIVATE” Indicates that cell-phone is busy in the private mode. Detroit –5:00 Dhaka +6:00 Ekaterinburg +5:00 Harare +2:00 Helsinki +2:00 Hong Kong +8:00 Islamabad +5:00 Istanbul +2:00 Jakarta +7:00 Jerusalem +2:00 Johannesburg +2:00 Kabul +4:30 KIV-BT901/ KIV-701...
  • Page 77 Continent City Time Difference Kansas City –6:00 Kathmandu +5:45 Kingston –5:00 Krasnoyarsk +7:00 Kuala Lumpur +8:00 Kuwait +3:00 Kyiv +2:00 Las Vegas –8:00 Lima –5:00 London +0:00 Los Angeles –8:00 Madrid +1:00 Magadan +11:00 Manila +8:00 Mexico City –6:00 Midway Is. –11:00 Minsk +2:00...
  • Page 78 CALIFORNIA, USA ONLY • Contains Transmitter Module This product contains a CR Coin Cell Lithium Battery FCC ID : RKXCK5000NVIA which contains Perchlorate Material – special handling • Contains Transmitter Module may apply. IC : 5119A-CK5000NVIA See www.dtsc.ca.gov/hazardouswaste/perchlorate KIV-BT901/ KIV-701...
  • Page 79: Accessories/ Installation Procedure

    5 m (16.4 ft) • When only two speakers are being connected to the * KIV-BT901 only system, connect the connectors either to both the front output terminals or to both the rear output terminals (do Installation Procedure not mix front and rear).
  • Page 80: Connecting Wires To Terminals

    CONT amplifier of the film-type or short pole type antenna. Brown To connect the Kenwood navigation system, consult your navigation (Mute control wire) MUTE manual. Connect to the terminal that is grounded when either the telephone ⁄...
  • Page 81: Installation/Removing The Unit

    Installation/Removing the Unit Non-Japanese Cars Removing the Hard Rubber Frame Engage the catch pins on the removal tool and remove the two locks on the upper level. Lift up and pull the frame forward as shown in the figure. Lock Catch Bend the tabs of the mounting sleeve with a screwdriver or similar...
  • Page 82: Troubleshooting Guide

    Installation/Removing the Unit Troubleshooting Guide Accessory of KIV-BT901 Some functions of this unit may be disabled by some settings made on this unit. Installation the Microphone Unit Check the installation position of the microphone • Cannot set up the subwoofer.
  • Page 83 Hands-free What might seem to be a malfunction in your unit may just be the result of slight misoperation or The hands-free talk volume is low. miswiring. Before calling service, first check the  The hands-free talk volume is set at a low level. following table for possible problems.
  • Page 84 Kenwood dealer. displayed, initialize the USB device or use  Try all over again from the start. If this error other USB devices. is still displayed, consult a local Kenwood dealer. No Device: The USB device is selected as a source although no USB device is connected.
  • Page 85 Bluetooth Pandora No Number: • The calling party does not notify a caller ID. Pandora Error_01: Registration in Bookmark has failed. • There is no phone number data. Pandora Error_02: Deletion of the station has failed. No Data: • There is no outgoing call list. Pandora Error_03: Registration of the station has failed.
  • Page 86: Specifications

    : 530 kHz – 1700 kHz Usable sensitivity (S/N = 20dB) Monitor section : 28 dBµ (25 µV) Picture Size Bluetooth section (KIV-BT901) : 3 inches (diagonal) wide : 65.52 mm (W) x 36.84 mm (H) Version Display System : Bluetooth Ver. 2.0 Certified...
  • Page 87: Rear View Camera

    Input level : 1 Vp-p/ 75 Ω (NTSC) General Operating voltage KIV-BT901 (10.5 – 16V allowable) : 14.4 V KIV-701 (11 – 16V allowable) : 14.4 V Maximum Current consumption : 10 A Installation Size (W x H x D)
  • Page 88 • The “AAC” logo is a trademark of Dolby Laboratories. • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners.
  • Page 89 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KIV-BT901/ KIV-701 Serial number...
  • Page 90: About The Quick Start Guide

    For functions that are not explained here, refer to the First step ............. 4 relevant Instruction Manual which can be downloaded at http://manual.kenwood. Basic Operations ........5 com/edition/im337. To refer to the Instruction Manual, a PC Playing Music (USB/iPod/Zune/ loaded with Microsoft®...
  • Page 91: Before Use

    [SRC] button for at least 3 seconds. The unit • When you purchase optional accessories, returns to factory settings when the reset check with your Kenwood dealer to make operation is complete. sure that they work with your model and SRC MENU Volume in your area.
  • Page 92: First Step

    First step Operation of the [Volume] knob MENU When setting the unit, use the [Volume] knob to select the item and determine the setting. The operation of the knob is common for the most of the settings. Turn to select/ adjust Press to determine the item.
  • Page 93: Basic Operations

    Basic Operations Volume iPod KIV-701 USB Terminal Auxiliary input Power USB terminal Turns the power ON by pressing the iPod can be connected. [SRC] button. Press the [SRC] button for at least 1 second to turn the power OFF. Source selection Press the [SRC] button each time switches between sources.
  • Page 94: Playing Music (Usb/Ipod/Zune/Pandora®)

    Playing Music (USB/iPod/Zune/PANDORA®) Volume MENU DISP SEARCH MODE ¢ USB Terminal SCRL Playing USB device Switching display Connect a USB device, iPod or Zune to Press the [DISP] button to select display the USB terminal. mode. When connected, the source is switched Selects the Artwork small, Artwork large, automatically and a song starts playing.
  • Page 95 • Playable Audio file: AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), Linear PCM (WAV) (.wav) An online manual about audio files is put on the site, www.kenwood.com/cs/ce/ audiofile/. About Video files • Acceptable video files: H.264/MPEG-4 AVC (.mp4, .avi : Baseline Listening to PANDORA®...
  • Page 96: Listening To The Radio

    Listening to the Radio MENU Volume ¢ Selecting a Tuner source Station Preset Memory Press the [SRC] button to select “TUNER”. Press the [4] or [¢] button to select the station you want to store in memory. Selecting the Band Press the [MENU] button.
  • Page 97: Basic Operations Of Remote Control

    Basic Operations of Remote Control 38/ENT 5/∞ AM– 1—0 General control Preparing the remote control unit • Volume control: [VOL] Pull the battery sheet out from the remote control unit to the direction of the arrow. • Source select: [SRC] •...
  • Page 98: Hands-Free Phoning

    Function of KIV-BT901, KIV-701 with KCA-BT300/KCA-BT200 (Optional Accessory) Hands-free phoning KIV-BT901 Volume iPod KIV-701 Registering your cellphone with KIV-701 this unit By operating the cellphone, register the hands-free unit (pairing). Select “KCA- KIV-BT901 BT300” or “KCA-BT200” from the list of...
  • Page 99 Calling a number in the Phone Book To use the phone book it must have been downloaded from the cell phone in advance. KIV-BT901 Press the [ ] button. KIV-701 Press the [iPod] button for at least 1 second. Turn the [Volume] knob to select “Phonebook”, and then press the...
  • Page 100: Audio Adjustments

    Audio Adjustments SRC MENU Volume Press the [SRC] button to select a source other than “STANDBY”. Press the [Volume] button to enter “ON” “OFF” Audio Control mode. Turn the [Volume] knob to select the setting item, and then press the [Volume] knob.
  • Page 101: Function Settings

    Function Settings SRC MENU Volume Press the [SRC] button to select the source. “ON” Press the [MENU] button to enter Menu List mode. Turn the [Volume] knob to select “OFF” the setting item, and then press the [Volume] knob. Turn the [Volume] knob to make a “ON”...
  • Page 102: Accessories

    • Do not use your own screws. Use only 5 m (16.4 ft)..1 the screws provided. If you use the wrong * KIV-BT901 only screws, you could damage the unit. • If the power is not turned ON (“Protect” is displayed), the speaker wire may have...
  • Page 103 • Connect the speaker wires correctly to the For Good Reception terminals to which they correspond. The To assure good reception, note the unit may be damaged or fail to work if following: you share the - wires or ground them to •...
  • Page 104: Connecting Wires To Terminals

    Rear View Camera Input (“R-CAM Interruption” page 13) ⁄ Do not remove the cap Microphone input when you do not use the (KIV-BT901 only) USB cable. The connector will cause the unit to Microphone (Accessory 7) malfunction if it gets in (KIV-BT901 only) touch with any metallic part of the vehicle.
  • Page 105 FM/AM antenna input (JASO) AUX input (Stereo) Use the mini-plug (3.5 mm ø) which is stereo type and does not have any resistance. To Kenwood disc changer/ External optional accessory Wiring harness ⁄ To connect these leads, refer to the (Accessory 1) relevant instruction manuals.
  • Page 106: Installation/Removing The Unit

    Installation/Removing the Unit Non-Japanese cars Removing the hard rubber frame 1. Engage the catch pins on the removal tool and remove the two locks on the upper level. Lift up and pull the frame forward as shown in the figure. Catch Bend the tabs of the mounting sleeve Lock...
  • Page 107: Installation The Microphone Unit

    KIV-BT901 only Installation the Microphone Unit 1. Check the installation position of the microphone (accessory 7). 2. Remove oil and other dirt from the installation surface. Accessory 3. Install the microphone. 4. Wire the cable up to the unit with it secured at several positions using tape or the like.
  • Page 108 FCC WARNING IC (Industry Canada) Notice This equipment may generate or use radio Operation is subject to the following two frequency energy. Changes or modifications to conditions: this equipment may cause harmful interference (1) This device may not cause interference, and unless the modifications are expressly approved (2) this device must accept any interference, in the instruction manual.
  • Page 109: List Of The Function Items

    List of the function items/ Liste des éléments Audio Control/ Commande du son/ Control de audio Items Éléments Elementos In iPod source/ En source iPod/ Con fuente iPod Items Éléments Elementos Menu List/ Liste de menu/ Lista de menú Common function items/ Élément de fonction communes/ Elementos de función comunes Items Éléments...
  • Page 110 This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful infl uence on the environment. Ce symbole indique que Kenwood a fabriqué ce produit de façon à ce qu'il ait un impact moindre sur l'environnement. Este símbolo indica que Kenwood ha fabricado este producto de forma que se...
  • Page 111 Dear Customer, panneau cas de d'endo mmagement. Thank you for purchasing this kenwood product. As mentioned in the pages of this booklet, our warranty is only Aten~ao: valid in the countries listed. your country is not listed please contact your retailer for information on warranty...
  • Page 112 Nota Fiscal main-d'oeuvre OOcessairespour effectuer reparations bandes, disques endommages deperis, venda ao oonsumidor final. RENONCIATION JVC KENWOOD DO BRASIL COMERCIO DE ELECTRONICOS LTDA. pourvu que de tels defauts sont attribuables pieces defauts dommages causes piles d8fectue uses Eventuais reparos realizados no produto...

This manual is also suitable for:

Kiv-701

Table of Contents