Adding A Voice Dialing Command - Kenwood DPX404U Instruction Manual

Adding a Voice Dialing Command
Add a voice tag to the phone book for voice dialing.
You can register up to 35 voice tags.
1
Enter Bluetooth mode
Press the [LOG] button for at least 1 second.
2
Enter Phone book name edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Settings"
Edit".
3
Search for the name to register
Select the name to register with reference to 4 in
<Calling a Number in the Phone Book> (page
If a voice tag has already been registered for a
name, "*" is displayed before the name.
4
Select a mode
Turn the [VOL] knob.
Display
"PB Name Regist. "
"PB Name Check"*
"PB Name Delete"*
* Displayed only when a name for which a voice tag has
been registered is selected.
Select "PB Name Regist." (Regist)
5
Register a voice tag (first)
"Enter Voice 1" is displayed.
When a beep is heard, say a voice tag within 2
seconds.
6
Confirm the voice tag (second)
"Enter Voice 2" is displayed.
When a beep is heard, say the same voice tag as
that you said in step 6 within 2 seconds.
"Completed" is displayed.
7
End registration
Press the [VOL] knob.
Return to step 2. You can register another voice tag
continuously.
⁄
•
If your voice cannot be recognized, a message is displayed.
Pressing the [VOL] knob allows you to retry voice input.
>
"Voice Tag" "PB Name
Operation
Register a voice tag.
Play a voice tag.
Delete a voice tag.
Select "PB Name Check" (Play)
5
Press the [VOL] knob.
Select "PB Name Delete" (Delete)
5
Delete a voice tag
Press the [VOL] knob.
6
Turn the [VOL] knob to select "YES", and then
press the [VOL] knob.
Exit BT Settings mode
Press the [LOG] button for at least 1 second.
⁄
•
Audio sound is not output during voice tag registration.
32).
67
|
English