Auto Memory Entry; Direct Access Tuning; Preset Tuning - Kenwood KIV-700 Instruction Manual

Tuner Operation

Auto Memory Entry

Putting stations with good reception in the memory
automatically.
1
Select the radio band you wish to store in the
preset memory
2
Enter Menu List mode
Press the [MENU] button.
3
Enter Auto Memory Entry mode
Turn the [Volume] knob and press it when the
desired item is displayed.
>
Select "Settings" "Auto Memory".
4
Open Auto Memory Entry
Turn the [Volume] knob and press it when the
desired item is displayed.
Select "YES".
When 6 stations that can be received are put in the
memory, auto memory entry closes.

Preset Tuning

Recalling the stations in the memory.
1
Select the radio band
2
Enter Menu List mode
Press the [MENU] button.
3
Select a desired station in the memory
Turn the [Volume] knob and press it when the
desired item is displayed.
Select "List & Memory"
24
|
KIV-700
>
Preset number.
Autogood products Internet store "130"
Function of remote control

Direct Access Tuning

Tuning in a desired radio station by entering the
frequency.
1
Select the radio band
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency Press button
92.1 MHz (FM) [9], [2], [1]
810 kHz (AM) [8], [1], [0]
4
Tune in to the entered frequency
Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.