Variquest Poster Maker 3600 User Manual page 53

Split Printing
8. Place the original face down on the scanner again, and then press [Start/Stop].
9. Tape the left and right halves of the poster together.
3-26
Note: Be sure to place the document on the scanner exactly the way you did in
step 5, using the same orientation, or the two halves of the poster will not line up
when you tape them together.
The printer scans the right half of the original and then prints the right half of the
poster. If necessary, press [Cut] to cut the paper after the poster prints.
a. Cut away or fold back the excess paper from the left half of the poster. Use the
cut marks as a guide.
b. Place the left half of the poster on top of the right half and adjust the two
halves until they are in alignment. Apply clear tape to both ends of the poster
to hold them in place.
c. Apply a long strip of tape along the seam joining the two halves of the poster.
Cut away any excess tape after taping the two halves of the poster together.
®
VariQuest Poster Maker 3600 User's Guide