Variquest Poster Maker 3600 User Manual page 16

Safety Precautions
• When manually cutting the paper with the paper
cutter, be sure the piece of paper to be cut is at
least 2" (50 mm) wide. Cutting a narrower strip of
paper could cause a paper or cutter jam.
• Do not touch the paper cutter while the cutter is
operating. This could result in injury to yourself or
damage to the system
• Avoid contact with the thermal heads (which
retain heat) immediately after using the printer.
Be careful not to damage the platen rubber. Do
not wipe the platen rubber with alcohol or other
solvents.
• Avoid placing the printer in a location where it is
subjected to direct sunlight or large amounts of
dust, or near an air conditioning or heating unit.
1-10
• When moving the printer, be careful not to bend or
dent the cutter guard on the front of the system.
• Ensure that pins, paper clips and other foreign
objects are not dropped inside the printer.
• When cleaning the printer, carefully follow the
"Cleaning the System," page
instructions in
5-7
. Do not use abrasive cleaners, thinners,
benzine or rubbing alcohol to clean the printer;
these may cause the plastic to deteriorate or
change color. When cleaning the thermal heads,
use only high-grade isopropyl alcohol applied to a
foam tip swab.
VariQuest
®
Poster Maker 3600 User's Guide