Installing The Frontfork Legs - Yamaha T135SE Service Manual

FRONT FORK
6. Fill:
9 front fork leg
(with the specified amount of the recom-
mended fork oil)
Quantity (each front fork leg)
0.064 L(2.26 Imp.oz, 2.16 US oz)
Recommended oil
Fork oil 10W or equivalent
Front fork leg oil level
top of the inner tube, with the inner
tube fully compressed and without
the fork spring)
104.5 mm (4.11 in)
NOTE:
9 While filling the front fork leg, keep it upright.
9 After filling, slowly pump the front fork leg up
and down to distribute the fork oil.
7. Install:
9 fork spring 1
NOTE:
Install the fork spring with the smaller pitch fac-
ing up.
EAS00662
INSTALLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Install:
9 front fork leg 1
9 front fork cap bolt 2
Temporarily tighten the lower bracket pinch
bolt.
NOTE:
Pull up the inner tube until it is stopped, then
install the front fork cap bolt 2 .
2. Tighten:
9 lower bracket pinch bolt 1
9 front fork cap bolt 2
7-37
http://www.motorcycle.in.th
CHAS
aa
(from the
43 Nm (4.3 m·kg, 31 ft·lb)
50 Nm (5.0 m·kg, 36 ft·lb)