Installing The Kickstarter - Yamaha T135SE Service Manual

1
b
3
a

INSTALLING THE KICKSTARTER

1. Install:
2
90˚
NOTE:
9 Offset the kickstarter ratchet gear as shown,
and then align the spline to install the kick-
starter ratchet gear.
9 Hook the kickstarter spring end onto the pin
4
a in the crankcase, and then turn the kick-
starter shaft counter-clockwise to 3/4 turns b .
2. Install:
3. Install:
4. Install:
5. Install:
6. Install:
7. Install:
8. Install:
4-74
http://www.motorcycle.in.th
KICKSTARTER
9 kickstarter ratchet gear 1
(on to the kickstarter shaft)
9 kickstarter shaft 2
9 kickstarter spring
9 guide stopper 3
9 guide stopper bolts
12 Nm (1.2 m•kg, 9.0 ft•lb)
9 kickstarter gear 4
9 crankcase
Refer to "CRANKCASE".
9 engine
Refer to "REMOVING THE ENGINE".
9 starter motor (T135SE)
Refer to "STARTER MOTOR (T135SE)" in
chapter 8.
9 oil pump assembly
Refer to "OILPUMP".
9 generator
Refer to "GENERATOR AND STARTER
CLUTCH".
9 shift shaft
Refer to "SHIFTSHAFT".
9 clutch
Refer to "CLUTCH".
9 gasket
9 dowel pins
9 crankcase cover bolts
9 crankcase cover (right)
9 oil level plug
9 kickstarter lever
9 kickstarter lever nut
ENG