Epson Stylus Pro 7600 Printer Manual page 39

1-24 | Setting Up the Printer
Note
If you can't insert the
cartridge smoothly,
you may have the
wrong cartridge.
Caution
Never turn off the printer
or change the position of
the ink lever while the
Pause light is flashing.
6. Install the ink cartridges in the printer. Hold each cartridge with the
arrow mark pointing toward the printer. Insert it until the
corresponding
Ink Out
Photographic Dye ink users: insert the black ink cartridges in the
•
first two slots on the left.
UltraChrome ink users: install the Photo Black cartridge in the first
•
slot on the left, then install the Light Black cartridge in the second
slot.
7. After installing all the cartridges, lower the ink lever to the locked
position and close the ink compartment cover.
The printer begins charging the ink delivery system and the
flashes. This takes about 10 minutes. Do not turn off the printer or
interrupt this process, or you'll use more ink than necessary.
When the
Pause
control panel, you're ready to load the roll paper.
1-24
light turns off on the control panel.
light stops flashing and
Pause
appears on the
Paper Out
light