Epson Stylus Pro 7600 Printer Manual page 158

Print quality problems (continued)
Problem
The bottom edge of
your print is smeared.
Solution
• The paper is curled toward the printable side. Flatten the paper or curl it toward the
other side.
• Make sure the Media Type setting in your printer software is correct for the media
you're printing on.
• If you're printing on non-EPSON media, you may need to adjust the paper thickness
setting or drying time. Use your printer software (page 3-14 for Macintosh or
page 4-12 for Windows) to choose the correct setting. When you're done printing
with a custom paper profile, be sure to return the setting to standard (STD).
• If printing on thick paper, the platen gap setting may be incorrect. Use the control
panel to change the setting to WIDE or WIDER. See page 2-19 for instructions.
6-9
Solving Problems | 6-9