Epson Stylus Pro 7600 Printer Manual page 32

5. Remove any packing tape from the printer. Be sure to check underneath
and on the sides.
6. Open the front cover and remove the wing screw and washer from the
print head, as shown above. Save these parts in case you need to ship the
printer.
7. Close the front cover.
8. Raise the stabilizer knobs and unlock the casters. Then move the printer
to the place of use. (The casters are meant for moving the printer over
only a short distance.) Lock the casters and extend the stabilizer knobs
after moving.
1-17
Setting Up the Printer | 1-17