Lexmark X215 MFP Service Manual page 35

Display
Document Jam
Door Open
Meaning
Paper was sensed at
the ADF registration
sensor, but not at the
ADF scan sensor.
Front or rear cover is
not securely latched.
Solution
• Make sure the ADF
scan sensor actuator
is not broken,
improperly installed
or stuck with paper
debris.
• If the paper path and
sensor actuator are
clear and working
properly, replace the
scanner assembly.
• Close the front toner
cartridge access
cover until it locks.
• If the message does
not clear, perform the
"Sensor test" on
page 3-16
proper operation of
the switch.
• If the switch works
properly, the problem
is likely associated
with the system
board.
• If the switch does not
work in the test,
make sure the cover
open actuator is
working properly.
When the cover
closes, the cover
should push the
actuator, causing the
cover open switch on
the HVPS/LVPS to
close.
Note: This process
is viewable with the
right cover removed.
• If all moving parts
appear to be working
correctly, and the
messages does not
clear, replace the
HVPS/LVPS.
Diagnostic information
4038-001
to check
2-3