Lexmark X215 MFP Service Manual page 25

Size (mm/in.)
2
Card stocks
A6 card (105 x 148/4.13 x 5.88)
Post Card (101.6 x 152.4/4 x 6)
Hagaki (100 x 148/3.94 x 5.83)
1
Maximum capacity may be reduced depending on paper thickness.
2
Media must be fed one sheet at a time through manual bypass.
Paper and speciality media guidelines
When selecting or loading paper, envelopes, transparencies, or
other specialty media, keep these guidelines in mind:
•
Attempting to print on damp, curled, wrinkled, or torn paper can
cause paper jams and poor print quality.
•
Use only high quality, copier grade paper. Avoid paper with
embossed lettering, perforations, or texture that is too smooth or
too rough.
•
Store paper in its ream wrapper until ready to use. Place
cartons on pallets or shelves, not on the floor. Do not place
heavy objects on top of the paper, whether it is packaged or
loose. Keep it away from moisture, or other conditions that could
cause it to wrinkle or curl.
•
During storage, you should use moisture-proof wrap, such as a
plastic container or bag, to prevent dust and moisture from
contaminating your paper.
•
Always use paper and other materials that conform with those
listed in
•
Use only well-constructed envelopes with sharp, well creased
folds.
•
Do not use envelopes with clasps and snaps.
•
Do not use envelopes with windows, coated lining, self-
adhesive seals, or other synthetic materials.
•
Do not use damaged or poorly made envelopes.
"Selecting print materials" on page
Input source/capacity
Paper tray
No/0
1-2.
General information
4038-001
1
Bypass
feeder
Yes/1
1-3