Canon FY8-13FW-000DADF-A1 Service Manual page 99

2) Clean the sensor S1 [3] shown in the
following figure.
Figure 3-404
2. Reflecting Face (original sensor)
1) Clean the reflecting face [2] of the original
sensor while keeping the delivery roller [1]
down.
[1]
Figure 3-405
COPYRIGHT © 1998 CANON INC.
[3]
[2]
CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
3. Registration Sensor (S3)
1) Remove the separation belt unit.
2) Remove the four screws [2], and detach
the separation guide plate [1].
[2]
Figure 3-406
3) Remove the two screws [4], and detach the
inside guide plate.
[4] [3]
Figure 3-407
[1] [2]
[4]
3-31