Canon FY8-13FW-000DADF-A1 Service Manual page 63

Jam type
Delivery failure
DADF open
Deli-
very
Upper cover open
Re-circulating
lever idle rotation
caution
1. Result of Detection
The DADF will stop operation immediately upon detection of a jam shown in Table 2-209.
2. Resetting
For a pick-up delay jam, the machine may be reset by removing the original from the
original tray. For other types of jams, remove the originals from the original tray, remove the
jam from the DADF, and open the DADF.
Reference:
As a rule, detection of a condition for the first original is treated as "improperly placed original";
jams are identified starting with the detection of a condition for the second and subsequent
originals.
COPYRIGHT © 1998 CANON INC.
Sensor type
S3,S6
At time of delivery in bottom separation pick-up mode,
the original fails to stop (e.g., the original that has been
picked up is longer than the original being delivered).
MS1
While the copier is at reset because of, for example, the
absence of paper, the DADF is opened.
MS2,S4
While the copier is at reset because of, for example, the
absence of paper, the upper cover is opened.
S13
At time of original pick-up, the re-circulating lever fell off
a stack of original.
Table 2-209c
CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 BASIC OPERATION
Description Code
84H
91H
92H
93H
2-49