Canon FY8-13FW-000DADF-A1 Service Manual page 43

6) Adjusting the Sheet-to-Sheet Distance
The clutch is turned off, and the feeding
belt is rotated slowly counterclockwise,
eliminating the overlap of two originals
and, as a result, adjusting the sheet-to-
sheet distance.
7) Feeding
After the sheet-to sheet distance between
two originals is adjusted to a specific value,
the clutch (CL) is turned on to eliminate the
difference in speed between the delivery/
reversing roller and the feeding belt; then,
the two originals are moved to the
copyboard glass.
8) Delivering the 1st Original
After copying, the feeding belt is rotated
clockwise slowly, and the 1st original is
pulled by the delivery/reversing roller and
delivered.
Reference:
At this time, the leading edge of the 2nd
original is moved to and stopped at the
index on the horizontal size plate.
COPYRIGHT © 1998 CANON INC.
Delivery/reversing roller
CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 BASIC OPERATION
Sheet-to-sheet distance
Figure 2-237
Delivery/reversing roller
Figure 2-238
Delivery/reversing
1st original
roller
Figure 2-239
Feeding belt
Feeding belt
Sheet-to-sheet distance
Feeding belt
2nd original
2-29