Canon FY8-13FW-000DADF-A1 Service Manual page 49

2. Bottom Pick-Up Mode Delivery
a. Operation
The machine delivers an original on the
copyboard glass to the original tray as follows:
1) Feeding Belt Delivery
The feeding belt is rotated clockwise to
move the original from the copyboard
glass for delivery.
2) Delivery/Reversing Roller Delivery
The original fed by the feeding belt is
moved farther between the delivery/
reversing roller and the feeding roller. In
the case of a small-size original, two
originals are picked up simultaneously.
Reference:
When the leading edge of an original is
moved about 15 mm from the reversal
sensor (S8), the feeding belt starts to
rotate counterclockwise to be ready for
the next pick-up operation.
3) Delivery/Reversal Switching
The paper deflecting plate solenoid (SL3)
is off and, therefore, the paper deflecting
plate remains closed, moving the original
to the original tray as a result.
The next original is picked up and moved
to the copyboard glass.
COPYRIGHT © 1998 CANON INC. CANON DADF-A1 REV.0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 BASIC OPERATION
Figure 2-252
Delivery/reversing roller
Reversal sensor (S8)
Feeding roller
Figure 2-253
Paper deflecting plate
Figure 2-254
Feeding belt
Scanner
Original tray
2-35