MSI MS-6391 User Manual page 92

Appendix A
Note: If you want to connect your GeneLink
Home/Office LAN, you should use the same protocol for the two LANs.
For example, if your Home/Office LAN uses TCP/IP protocol, you should also
use TCP/IP protocol for your GeneLink
cannot communicate to each other. The Setup Program installs TCP/IP, NetBEUI
and IPX protocols for GeneLink
uses other protocol, please install the same protocol for those computers within
GeneLink LAN.
TM
Connecting to Internet through USB PC to PC & Office/
Home LAN
If you would like to access Internet resources through USB PC to
PC, here are some things you should notice:
a. You must define which computer should install GeneLink
Software Router.
b. The computer which has installed GeneLink
should have already been connected to internet.
c. All clients which would like to access Internet resources through
USB cable should have installed GeneLink
Now we need to make some network configurations on the Desk-
top/Notebook which connect to GeneLink
your Internet access possible (maybe you need to consult you Network
Administrator for doing that):
a. If your existing home/office network is NOT using DHCP to
assign client's IP address, your need to:
LAN. Otherwise, these two LANs
TM
LAN by default. If your Home/Office LAN
TM
Software Router to make
TM
A-6
LAN to your existing
TM
Software Router
TM
driver.
TM
TM