Quick Boot; Boot Other Device - MSI MS-6391 User Manual

Chapter 3
CPU L1 & L2 Cache
Cache memory is additional memory that is much faster than the system
memory. When the CPU requests data, the system transfers the requested
data from the main memory into cache memory, for even faster access by
the CPU. Available options are:
Enabled (default)
Disabled
Note: The internal cache is built in the processor.

Quick Boot

This item allows you to speed up Power On Self Test (POST) after you
power on the computer. If this is set to [Enabled], BIOS will shorten or
skip some check items during POST. Available options are [Disabled]
and [Enabled]. Default value is [Disabled].
1st/2nd/3rd Boot Device
These three items allow you to set the sequence of boot device from that
the BIOS attempts to load the operating system. Available options are
[Floppy], [LS120], [HDD-0], [SCSI], [CDROM], [HDD-1], [HDD-2],
[HDD-3], [ZIP100], [LAN], and [Disabled].

Boot Other Device

This item allows the system to try to boot from other device if the system
fails to boot from the 1st/2nd/3rd boot device. Available options are
[Disabled] and [Enabled]. Default value is [Enabled].
Swap Floppy
This item allows you to choose from the default of [Disabled] or choose
[Enabled] to switch the floppy disk drives between being designated as
A and B. Available options are [Disabled] and [Enabled]. Default value
is [Disabled].
Enable cache function
Disable cache function
3-10