Entering Setup; Control Keys - MSI MS-6391 User Manual

Chapter 3

Entering Setup

Power on the computer. When the below message appears briefly
at the bottom of the screen during the POST (Power On Self Test), press
<Del> key or simultaneously press <Ctrl>, <Alt>, and <Esc> keys to
enter Setup.
TO ENTER SETUP BEFORE BOOT, PRESS <CTRL-ALT-ESC>
OR <DEL> KEY
If the message disappears before you respond and you still
wish to enter Setup, restart the system by turning it OFF then On or
pressing the RESET button to try again. You may also restart by
simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.

Control Keys

< > Move to the previous item
↑
< > Move to the next item
↓
Move to the item in the left hand
< >
←
Move to the item in the right hand
< >
→
< Enter > Select the item
< Esc > Jump to the Exit menu or return to the Main menu from a submenu
< +/PU > Increase the numeric value or make changes
< - /PD >
Decrease the numeric value or make changes
< F1 > General help, only for StatusPage Setup Menu and Option Page
Setup Menu
< F5 > Restore the previous CMOS value from CMOS, only for Option
Page Setup Menu
< F6 > Load the default CMOS value from the Fail-Safe default table,
only for Option Page Setup Menu
< F7 > Load Optimized defaults
< F10 > Save all the CMOS changes and exit
3-2