Installing Genelink Lan Driver - MSI MS-6391 User Manual

Appendix A
Installing GeneLink™ LAN Driver
Before you use the function, you need to install the GeneLink™
LAN Driver to all PCs connected via USB PC to PC cables.
Step 1. Installing driver
1. Insert the driver CD and click "USB PC to PC" button to install the
driver.
2. The welcome dialog box appears and click Next > button.
3. Choose the destination folder and click Next > button.
4. Select components that you want to install and then click
"Next >" button. (GeneLink
PCs connected via USB PC to PC port so that resources are shared
between these PCs; GeneLink
to connect to another existing Home/Office LAN for network re
source or Internet sharing.)
5. The Setup Program will install all necessary components
automatically.
6. Setup completes. Then select "Yes, I want to restart my computer
now" and then click "FInish" button to reboot your computer for
updating your driver configuration.
After you complete the installation procedures, you'll find Setup
Program has installed GeneLink
binds TCP/IP, NetBEUI and IPX protocols to GeneLink
Step 2. Connect your PCs via the USB PC to PC cable
LAN Driver is used only for those
TM
Software Router allows your PC
TM
network driver in your computer. It
TM
A-2
device.
TM