Blodgett DFG-100 Installation Operating & Maintenance Manual page 29

Definition: If you are using sensitivity as a tim-
ing mode for single stage stage recipes this
feature must be turned on.
Use the PROGRAM ARROW KEYS (4) to select ei-
ther Yes or No. Press the PROGRAM KEY (3).
8. The display reads:
Shelf 1 Sense
Use the PRODUCT KEYS (14) to enter sensitivity
level of 1-9 for shelf 1. Press the PROGRAM KEY
(3). Repeat for shelves 2-5.
9. The display reads:
Preheat Time
Definition: This function programs time for the
oven to idle after reaching the preheat temper-
ature allowing heat to saturate the oven cavity.
The preheat time only applies to the initial pre-
heat after a cold start. This is strictly a prompt,
the user may begin a bake cycle even with the
preheat prompt displayed.
Use the PRODUCT KEYS (14) to enter a preheat
time. Press the PROGRAM KEY (3).
10. The display reads:
Recipe Stage
Use the PROGRAM ARROW KEYS (4) to select ei-
ther Yes or No. Press the PROGRAM KEY (3).
11. The display reads:
Recipe Name
XXX
XXX
YES
YES
Blodgett iQ2™ vision control
This enables you to program a product name. Use
the PROGRAM ARROW KEYS (4) to select either
Yes or No. Press the PROGRAM KEY (3).
12. The display reads:
Use the PROGRAM ARROW KEYS (4) to select ei-
ther Yes or No. Press the PROGRAM KEY (3).
13. The display reads:
Recipe Fan Speed
Use the PROGRAM ARROW KEYS (4) to select ei-
ther Yes or No. Press the PROGRAM KEY (3).
14. The display reads:
Recipe Fan Cycle
Use the PROGRAM ARROW KEYS (4) to select ei-
ther Yes or No. Press the PROGRAM KEY (3).
15. The display reads:
Use the PROGRAM ARROW KEYS (4) to select ei-
ther Yes or No. Press the PROGRAM KEY (3).
16. The display reads:
Use the PROGRAM ARROW KEYS (4) to select ei-
ther Yes or No. Press the PROGRAM KEY (3).
27
Operation
Recipe Shelf
YES
YES
YES
Recipe Alarm
YES
Recipe Hold
YES