Blodgett DFG-100 Installation Operating & Maintenance Manual page 26

Operation
Blodgett iQ2™ vision control
7. The display reads:
Stage 1 Timing
Definition: There are 3 options for timing
mode when shelf cooking: Straight, Flex and
Sensitivity. Straight has no time adjustment.
Flex adjusts the cook time to compensate for
any difference between the setpoint and actual
temperature. Sensitivity enables a product key
to have a flex adjustment for each of the five
shelves. Sensitivity values are set in the man-
ager level programming.
NOTE: Sensitivity is only available when using shelf
cooking.
Use the PROGRAM ARROW KEYS (4) to select the
desired timing mode. Press the PROGRAM KEY (3).
8. The display reads:
Stage 1 Fan Speed
Use the PROGRAM ARROW KEYS (4) to select ei-
ther HIGH or LOW fan speed. Press the PROGRAM
KEY (3).
9. The display reads:
Stage 1 Fan Cyc
Definition: There are 3 options for fan cycle
time: Pulse, Heat and Full. Pulse allows the fan
to turn on and off as programmed. Heat allows
the fan to operate with heat only. Full provides
continuous fan operation when door is closed.
Use the PROGRAM ARROW KEYS (4) to select the
fan cycle. If heat or full are selected skip to step 10. If
pulse is selected the display reads:
Stage 1 Fan On
XX:XX
XX
XXX
XX:XX
Use the PRODUCT KEYS (14) to enter the desired
length of the time the fan should be on in the pulse
cycle. Press PROGRAM KEY (3). The display reads:
Use the PRODUCT KEYS (14) to enter the desired
length of the time the fan should be off in the pulse
cycle. Press the PROGRAM KEY (3).
10. If you are programming a product using shelf cooking
skip to step 11.
If you are programming a product that does not use
shelf cooking the display reads:
Repeat steps 5 through 10 for each remaining stage.
If you are programming a single stage recipe without
shelf cooking enter at time of 00:00 for stage 2.
11. The display reads:
Definition: If you would like the alarm to sound
prior to the completion of the cook cycle you
may program it here. The alarm time counts
up from the beginning of the cook cycle. For
example, if you want an alarm 9 minutes into
the cook cycle, program the alarm time at 9:00.
Use the PRODUCT KEYS (14) to enter the time for
the first alarm to sound. If 00:00 is entered for an
alarm time, skip to step 12.
Press the PROGRAM KEY (3). If a time other than
00:00 is entered the display reads:
24
Stage 1 Fan Off
XX:XX
Stage 2 Time
XX:XX
Alarm 1 Time
XX:XX