Drain System - Whirlpool Duet Sport WFW8300SW Instruction Manual

DRAIN SYSTEM

The washer can be installed using the stand-
pipe drain system (floor or wall), the laundry
tub drain system, or the floor drain system.
Select the drain hose installation method you
need. See "Tools and Parts."
Standpipe drain system - wall or floor
(views A & B)
The standpipe drain requires a minimum
diameter standpipe of 2˝ (5 cm). The mini-
mum carry-away capacity can be no less than
17 gal. (64 L) per minute.
The top of the standpipe must be at least 30˝
(76.2 cm) high and no higher than 96˝ (2.4 m)
from the bottom of the washer.
A
30" min.
(76.2 cm)
B
Laundry tub drain system (view A)
The laundry tub needs a minimum 20 gal.
(76 L) capacity. The top of the laundry tub must
be at least 30˝ (76.2 cm) above the floor.
Floor drain system (view B)
The floor drain system requires a siphon break
that may be purchased separately. See "Tools
and Parts."
The siphon break must be a minimum of 28˝
(71 cm) from the bottom of the washer. Addi-
tional hoses might be needed.
A
2-4
26" min.
(66 cm)
30" min.
(76.2 cm)
B