Event Search - EverFocus EMS200S User Manual

From: Select the date and time of recording from which you want the DVR to start searching.
To: Select the date and time of recording at which you want the DVR to stop searching.
GPS Border Type: Select either a circle or a rectangle.
Search Mode: Select if the search should look for events Inside or Outside the configured border.
Center Lat.: Set the latitude if the border type is circle.
Center Lon.: Set the longitude if the border type is circle.
Radius: If the GPS border type is circle, this option defines the circle's radius. Also select the distance unit
(Km/Mi).
Upper Left Lat.: Set Upper Left Latitude if the border type is a rectangle.
Upper Left Lon.: Set Upper Left Longitude if the border type is a rectangle.
Lower Right Lat.: Set Lower Right Latitude if the border type is a rectangle.
Lower Right Long.: Set Lower Right Longitude if the border type is a rectangle.
Click the button to start searching.
Click the button to return to the previous menu level.
4.1.4

Event Search

After clicking the Search icon on the Playback bar, the Time Search page will open. Click the button
at the bottom of the page to open the Event Search page. The DVR will search for and display all recorded data
within the selected time period where events of the selected type occurred. Selection options are Alarm events,
Video Loss events, and Power On events.
The Event Search menu
From: Select the date and time of recording from which you want the DVR to start searching.
To: Select the date and time of recording at which you want the DVR to stop searching.
Select which event type(s) to search for. Choose from Alarm, Video Loss or Power On.
Click on the button to select the recorded feeds of which cameras to include in the search.
25