EverFocus EMS200S User Manual page 11

Playback Rate
Playback Search
Video Loss Detection
Event Alarms
Email Alerts
G Sensor
GPS Function
Configuration Method
Control/Setup
Real-time Clock
Watchdog Function
Networking
Interfaces
Power Source
Dimensions
Weight
Operating Temp.
NTSC : D1 = 60fps
PAL : D1 = 50fps
Time/Date and Event search
Yes
SD card error, SD card temperature, SD card full, SD card missing, power loss, network loss,
GPS loss, GPS speed, GPS fencing
Multiple email notifications in response to selectable alarms and events
Via embedded 3-axis G Sensor – data recorded and alarm triggered if configurable user limits for
the X, Y or Z axes are exceeded
External, plug-in GPS module for speed-limit and geographic-limit monitoring and alarms
(rectangular or circular fencing)
On-screen-display menu with small-screen-friendly GUI
IR remote control, USB mouse, network interface
Can be synchronized with GPS/NTP time source; flexible DST settings
Reboots DVR automatically if required
RJ-45 port, 10/100Mbps, TCP-IP/DHCP/PPPoE/DDNS/SMTP/SSL/POP3/HTTP/NTP
Terminal block (RS232/Video/Audio/Alarm), GPS port, USB 2.0 port, LAN port, SD card slot, and IR
receiver.
13.8 VDC / 27.6 VDC nominal; 10~32 VDC range (built-in surge protection, voltage regulation,
programmable Delay On/Off relative to ignition or other switched voltage)
NOTE: This DVR is SAE certified. A power surge of more than 32V DC can damage this product.
Please check that the vehicle's power system does not create voltage values higher than this.
131 (W) x 38.4 (H) x 164.4 mm (D) --- 5.2 (W) x 1.5 (H) x 6.5 inches (D)
600g --- 1.32lbs
Working Temperature: -10~55 °C; 14~131 ºF
Storage Temperature: -40~85 °C; -40~185 ºF
NTSC : D1 = 120fps
PAL : D1 = 100fps
4