Resetting Your System; Additional Information; Product Specifications - Uniden UWS1113 Owner's Manual

Resetting Your System

Resetting the camera or receiver will erase any changes and set all values back to the default.
You should only reset your system under the following conditions:
Resetting the camera
- You are unable to pair the camera to the
receiver.
- The image on the screen is frozen.
To reset the camera or receiver, unplug the AC adapter. Wait at least 15 seconds, then reconnect
the AC adapter.

Product Specifications

Radio Frequency Transceiver
RF Frequency
Modulation
Spread spectrum
Anti Interference
Selectable camera channel
Data rate
Channel bandwidth
Transmitting range

Additional Information

2402 Mhz ~ 2483.5 Mhz
GFSK
Frequency Hopping
Clean Channel Dynamic Select
4
2 Mbps
2 MHz
200 meters/600 feet in an open area (line of sight)
Resetting the receiver
- The buttons on the receiver are not
responding.
- The image on the screen is frozen, and
resetting the camera did not help.
25