Chapter 3
Power Button Override
Pressing the power button for more than 4 seconds forces the system to enter
the Soft-Off state. The settings are: Delay 4 Sec, Instant Off.
Power/Sleep LED
This item configures how the system uses power LED on the case to indicate
the sleep state. Available options are:
Single LED The power LED blinks to indicate the sleep state without
Dual LED
After AC Power Lost
This item specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
Power Off
Power On
Last State
PM Wake Up Events
Press <Enter> to enter the sub-menu and the following screen appears:
IRQ [3-7,9-15],NMI/IRQ 8 Break Suspend
This setting enables/disables the monitoring of the specified IRQ line. If
set to Enabled, the activity of the specified IRQ line will prevent the
changing its color.
The power LED changes its color to indicate the sleep
state.
Leaves the computer in the power off state.
Reboots the computer.
Restores the system to the status before power failure
or interrupt occurred.
3-22