MSI MS-6533 User Manual page 53

Chapter 3
EPP mode simultaneously, choose "EPP." By choosing "ECP",
the onboard parallel port will operate in ECP mode only. Choosing
"ECP + EPP" will allow the onboard parallel port to support both
the ECP and EPP modes simultaneously.
EPP Mode Select
The onboard parallel port is EPP Spec. compliant, so after the user chooses
the onboard parallel port with the EPP function, the following message
will be displayed on the screen: "EPP Mode Select." At this time either
EPP 1.7 spec or EPP 1.9 spec can be chosen.
ECP Mode Use DMA
The ECP mode has to use the DMA channel, so choose the onboard
parallel port with the ECP feature. After selecting it, the following mes-
sage will appear: "ECP Mode Use DMA." At this time, the user can
choose between DMA channel 3 or 1.
Game Port Address/Midi Port Address
This setting assigns certain addresses for the game port and midi port.
Midi Port IRQ
This setting assigns an IRQ for the midi port.
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller
and you have USB peripherals. The settings are: Enabled, Disabled.
USB Keyboard Support
Set to Enabled if your need to use a USB keyboard in the operating system
that does not support or have any USB driver installed, such as DOS and SCO
Unix.
Onboard LAN function (Optional)
Select Enabled to activate the onboard LAN controller. Setting options:
Enabled, Disabled.
Onboard Lan Boot ROM (Optional)
This setting determines whether or not to activate the boot ROM of the onboard
LAN chip. Setting options: Enabled, Disabled.
3-18