Table of Contents
Advertisement
Chapter 3
SiS-7013 S/W Modem
This setting enables or disables the SiS-7013 S/W modem. Setting options:
Disabled, Enabled.
System Share Memory Size (for SiS650 chipset only)
For SiS650 chipset, the system shares memory to the onboard VGA card.
This setting controls the exact memory size shared to the VGA card.
Setting options: 4MB, 8MB, 16MB, 32MB, 64MB.
Onboard SuperIO Device
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDD) installed
on the system board and you wish to use it. If you install add-on FDC or
the system has no floppy drive, select Disabled in this field. The settings
are: Enabled and Disabled.
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and second
serial ports. The settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3,
Disabled, Auto.
UART Mode Select
This setting allows you to specify the operation mode for serial port 2.
Setting options: IrDA, ASKIR, Normal.
Normal
RS-232C Serial Port
3-16
Hide quick links:
Advertisement
Table of Contents
