Optional Accessories; Fan Kits - Vermont Castings RFSDV24 Installation Instructions And Homeowner's Manual

Freestanding direct vent fireplace

Hide thumbs Also See for RFSDV24:

Specifications (2 pages)

Table Of Contents

Table of Contents

Fan Kits

FK24 Fan Assembly

This auxiliary fan system increases the efﬁciency of the

circulation of the heating air.

The FK24 fan kit allows variable speed control of the

circulation fan and also incorporates a heat sensor in

the circuit.

Speciﬁcations

115 Volt / 60Hz / 56 Watts

Maintenance

The fan itself does not require regular maintenance,

however periodic cleaning of the fan and the

surrounding area is required.

Check the fan and the area around the fan assembly

and wipe or vacuum at least once per month during the

operating season.

Installation

NOTE: The FK24 is an option for Model RFSDV24;

standard with model RFSDV34. Install fan before

connecting gas line to ﬁreplace.

1. Open front access door; remove the cover valve.

2. Remove pre-mounted fan bracket at the rear of the

pedestal. Remember this location for reinstallation.

3. Open the fan kit; mount FK24 replacement fan

bracket. (Fig. 37)

4. Install the fan through the opening of the front

access door, with the outlet pointed up and the fan

mounting bracket toward the rear of the ﬁreplace.

(Fig. 38) The fan mounts over two studs that hold

the fan just below the ﬁrebox ﬂoor. Secure the fan in

place with two nuts provided.

5. Locate the fan speed control/junction box on screw

studs located on the right side of the cover valve.

Tighten with nuts provided.

6. Install thermal sensor element on screw studs

located to the right of the gas valve below the burner

base.

7. Reinstall cover valve. Plug in grounded service cord

to a convenient wall receptacle.

This fan assembly is furnished completely

wired. It must be electrically connected and

grounded in accordance with local codes.

US installations: Follow local codes and the National

Electrical Code ANSI/NFPA No. 70.

Canadian installations: In the absence of local codes,

follow current CSA C22.1 Canadian Electrical Code.

10003550

RFSDV24/34 Freestanding Direct Vent Gas Fireplace