Before Using; Important Safety Instructions - Panasonic BL-C10A Installation/Troubleshooting Manual

Installation/Troubleshooting
1

Before Using

1.1 IMPORTANT SAFETY INSTRUCTIONS

When using this unit, basic safety precautions should always be followed to reduce
the risk of fire, electric shock, or personal injury.
1.
Read and understand all instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
After taking away the dust on the lens, wipe the lens with a cotton bud.
6.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other devices (including amplifiers) that produce heat.
7.
Protect the AC adaptor cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the unit.
8.
When you operate the camera, the power outlet should be near the camera
and easily accessible.
9.
Do not touch the unit or the AC adaptor during lightning storms.
10.
Unplug the unit when unused for long periods of time.
11.
Refer all servicing to qualified service personnel. Servicing is required when
the unit has been damaged in any way, such as the AC adaptor cord or plug is
damaged, the unit does not operate normally, or has been dropped.
12.
The camera is intended for indoor use only. Prolonged exposure to direct
sunlight or halogen light may damage CMOS sensor.
SAVE THESE INSTRUCTIONS
Network Camera Memo
For your future reference
Date of purchase
Serial Number
(Found on the rear side of the main unit)
Name and address of dealer
4
Attach your purchase receipt here.
MAC Address
(Found on the rear side of the main unit)