About Other Features - Panasonic BL-C10A Installation/Troubleshooting Manual

Installation/Troubleshooting

2.8 About Other Features

Problem
The firmware is
not updated.
Shortcut icon is
not displayed in
the My Network
Places folder.
You cannot
solve problems.
28
• The firmware updating is not completed due to power off,
network failure or other causes.
Update the firmware again following the next procedures.
Disconnect the AC adaptor of the camera from
the outlet, and reconnect it again.
Enter the IP address on the web browser to access
the camera.
Access the Setup page and click [Status].
Check the firmware version on the Status page.
* See page 73 of the Operating Instructions in the Setup CD-
1
ROM about updating firmware.
• UPnP Windows
Windows Me.
Install UPnP Windows component in Windows XP or
Windows Me (see page 95 of the Operating Instructions in
the Setup CD-ROM).
• Call our customer call center at 1-800-272-7033.
Cause and Remedy
Is the Top page displayed?
Is the version updated?
The firmware update is completed.
component is not installed in Windows XP or
®
Troubleshooting
No
Yes
Yes
Update the firmware*
No
1
.