Channel Settings; Troubleshooting Procedure - Ricoh B867 Manual

IEEE 802.11b (Wireless LAN)
Status Display
Good
Fair
Poor
Unavailable
Communication status can be measured only when the infrastructure mode is
being used.

Channel Settings

If a communication error occurs because of electrical noise, interference with other
electrical devices, etc., you may have to change the channel settings.
To avoid interference with neighboring channels, it is recommended that you use a channel
separated from another in use by 3 channels. For example, if there are problems using
channel 11 (default), try using channel 8.

Troubleshooting Procedure

If there are problems using the wireless LAN, check the following.
1. Check the LED indicator on the wireless LAN card.
2. Check if "IEEE802.11b" is selected in the following user tool: Host Interface menu -
Network Setup - LAN Type.
3. Check if the channel settings are correct.
B867
Communication Status
76 ~ 100
41 ~ 75
21 ~ 40
0 ~ 20
138 SM