Selecting The Call Tone; Busy Channel Lockout - Uniden UH7750NB Owner's Manual

Operation

Selecting the Call tone

1. Press [MENU/ENTER] three times.
The call tone setting flashes.
2. Turn the Rotary Channel Selector at the
base or press
SPK/MIC to change the setting between 1, 2, 3, 4 and 5.
3. Press [MENU/ENTER] to
store the setting.
4. Press and hold
[MENU/ENTER] to
exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.
NOTE

Busy Channel Lockout

If the channel is already in use, you can prevent
the UHF CB Radio from transmitting . This is
particularly important when using CTCSS/DCS.
1. Press [MENU/ENTER] four times.
The BCL setting flashes.
2. Turn the Rotary Channel
Selector at the base or
press on the Remote
SPK/MIC to change the
setting between ON or OFF.
3. Press [MENU/ENTER] to
store the setting.
4. Press and hold [MENU/ENTER] to exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.
NOTE
UNIDEN UH7740NB UH7750NB
on the Remote
26
UHF CB Transceiver