Operation
Roger Beep
1. Press [MENU/ENTER] five times.
The roger beep setting flashes.
2. Turn the Rotary Channel Selector
at the base or press
Remote SPK/MIC to change the
setting between ON or OFF.
3. Press [MENU/ENTER] to
store the setting.
4. Press and hold
[MENU/ENTER] to
exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.
NOTE
Beep On/Off
1. Press [MENU/ENTER] six times. The
Beep setting flashes.
2. Turn the Rotary Channel Selector at the
base or press
to change the setting between ON or OFF.
3. Press [MENU/ENTER] to
store the setting.
4. Press and hold
[MENU/ENTER] to
exit from the menu mode.
UNIDEN UH7740NB UH7750NB
on the
on the Remote SPK/MIC
27
UHF CB Transceiver