Manual Wireless Network Setup - D-Link DIR-615 User Manual

Section 3 - Configuration
Enable Wireless:
Check the box to enable the wireless function. If you do not
want to use wireless, uncheck the box to disable all the wireless
functions. Click Add.New to create your own time schedule to
enable the wireless function.
Wireless Network
Service Set Identifier (SSID) is the name of your wireless network.
Name:
Create a name using up to 32 characters. The SSID is case-
sensitive.
802.11 Mode:
Select one of the following:
802.11g. Only - Select if all of your wireless clients are
802.11g.
802.11n.Only - Select only if all of your wireless clients are
802.11n.
Mixed.802.11n.and.802.11g - Select if you are using a mix
of 802.11n and 802.11g wireless clients.
Enable Auto Channel The Auto. Channel. Scan setting can be selected to allow
Scan:
the DIR-615 to choose the channel with the least amount of
interference.
Wireless Channel:
Indicates the channel setting for the DIR-615. By default the
channel is set to 6. The Channel can be changed to fit the channel
setting for an existing wireless network or to customize the
wireless network. If you enable Auto.Channel.Scan, this option
will be greyed out.
Transmission Rate: Select the transmit rate. It is strongly suggested to select Best.
(Auto) for best performance.
Channel Width: Select the Channel Width:
Auto.20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting.
Visibility Status: Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-615. If Invisible is selected, the SSID of the DIR-615 will not
be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-615 in order to connect to it.
Wireless Security: Refer to page 79 for more information regarding wireless security.
D-Link DIR-615 User Manual

Manual Wireless Network Setup

26