Manual Wireless Network Setup - D-Link DIR-605 User Manual

Broadband aggregation router

Hide thumbs Also See for DIR-605:

Table of Contents

Section 3 - Configuration

Enable Wireless:

Check the box to enable the wireless function. If you do

not want to use wireless, uncheck the box to disable all

the wireless functions. Click Add.New to create your own

time schedule to enable the wireless function.

Wireless Network

Service Set Identifier (SSID) is the name of your wireless

Name:

network. Create a name using up to 32 characters. The

SSID is case-sensitive.

802.11 Mode:

Select one of the following:

Mixed.802.11g.and.802.11b - Select if you are using

both 802.11b and 802.11g wireless clients.

802.11n.Only - Select only if all of your wireless clients

are 802.11n.

Mixed. 802.11n,. 802.11b,. and. 802.11g - Select if

you are using a mix of 802.11n, 11g, and 11b wireless

clients.

Enable Auto

The Auto.Channel.Scan setting can be selected to allow

Channel Scan:

the DIR-605 to choose the channel with the least amount

of interference.

Indicates the channel setting for the DIR-605. By default

Wireless Channel:

the channel is set to 6. The Channel can be changed to fit

the channel setting for an existing wireless network or to

customize the wireless network. If you enable Auto.Channel.Scan, this option will be greyed out.

D-Link DIR-605 User Manual

Manual Wireless Network Setup

Table of Contents